GENERAL DESCRIPTION

Tubular condensers used in power plant to condense exhaust steam are known as Surface Condensers. However, there are many other applications in which condensers are used, and a wide variety of condenser types has been developed.

The  Vertical Tube Surface Condensers and Receivers are of compact design and ready for floor mount installation.

STANDARD OPERATING FEATURES
Extra large tube diameter to minimize pressure drop. Observation ports are provided in the Receiver body. Welded Carbon Steel construction with annealed seamless brass tubes for long trouble-free service is standard. Units include an isolation valve for breaking vacuum to drain receiver without interrupting system operation.




How to use:
1. Determine vapor rate in pound per hour.
2. Select line indicating operating pressure of system.
3. Read right from point where vapor rate and system pressure line meet to select proper condenser size.


MODEL NO. 85-0 85-BS 85-CD 85-DD 85-E
Cooling Surface SQ. FT. 10 43 67 98 190
Cooling Water GPM @ 85 °F 20 30 55 65 110
Number of Tubes 12 38 58 76 142
Tube Shell Length 3'9" 5'1-1/2" 5'1-1/2" 5'9-3/4" 5'11-3/4"
Inside Dia. of Shell 6" 8-1/8" 11" 12-1/4" 16"
A 6'9-1/8" 8'10" 9'7-1/2" 10'5-1/4" 11'6-1/2"
B 6'6-1/8" 8'6-1/4" 9'3" 10'0-1/4" 11'1"
C 18-1/2" 28-1/2" 33-1/2" 33-1/2" 40-3/4"
D 24-3/8" 31" 39-1/4" 39-1/4" 50"
E 6" 8" 10" 11" 13"
F 2" 3" 4" 5" 6"
G 4" 4" 8" 8" 8"
H 4-3/4" 6" 7-1/2" 8-1/2" 9-1/2"
J 5/8" 5/8" 5/8" 3/4" 3/4"
L 2" 2-1/2" 3" 3" 3"
M -- 4" 4" 4" 4"
N -- 5-1/2" 6" 6" 6"
O -- 5/8" 5/8" 5/8" 5/8"
P 4-1/4" 10" 13-1/2" 13-1/2" 13"
R-TAP N.P.T. 1/2" 1" 2" 2" 2-1/2"
S-TAP N.P.T. 3/4" 1-1/4" 2-1/2" 2-1/2" 3"
U-TAP N.P.T. 1" 2" 2" 2" 2"
N.P.T.
W Gallons 8-1/2 27 52 52 97
Wt. Lbs. 375 700 1050 1200 1850


MANUFACTURED BY STOKES VACUUM, INC.


 

Technical information and estimating prices on Vertical Tube Surface Condensers and Receivers as manufactured by Stokes Vacuum, Inc. The estimating prices shown are FOB Philadelphia, Pennsylvania.

  • Add freight to jobsite
  • For additional technical information and firm prices for specific projects, contact Stokes Vacuum, Inc.

Model Estimating Price
85-0 $6.820,00
*85-BS $12.840,00
*85-CD $26.995,00
*85-DD $32.945,00
*85-E $59.210,00


Notes:

Equipment Cost - 3Q 2017

T* Jackets are ASME Code

 

When the equipment is received at the project site it will be necessary to unload, inspect, transport to point of installation, install and perform the cleanup work occasioned by the foregoing.
The Direct Labor Manhours required for the work described may be estimated as follows:


Type Manhours, Each
Tank Suction Heater or Line Type Heaters, any Model (18) Manhours Plus (1.5) Manhours Per Ton


Example: Estimate the Manhours required for installing Tank Suction Heater Model SBEU2407 ( weight = 4,000 LBS)
2 Tons = (18) Manhours + (1.5 x 2 Tons) or (18) + (3) for a total of (21) Manhours.
The Manhours above assume the transporting distance will not be in excess of 200'0" and that site or other obstructions do not exist.

MANHOURS EXTENSION TO DETERMINE DIRECT LABOR COST FOR INSTALLATION

The Manhours should be extended by a Composite Crew Rate determined from the Wage Rates in effect at the project site.


TANK SUCTION TYPE HEATERS WEIGHT & COST - 3Q 2017

 

Data Input


1 Inches
1 Feet

Vertical Tube Surface Condensers and Receivers Results


Cost (USD):

Weight (LBS):

Surf.Area (SF) :

Capacity (Gal) :

(Mhrs):



 
Copy Protected by Chetan's WP-Copyprotect.