TANK SUCTION OR LINE TYPE FUEL OIL HEATERS1

Tank Suction or Line Type Fuel Oil Heaters are used on the suction side of pumps for heating extremely viscous fluids (e.g. Bunker C fuel oils, asphalt, etc.) to reduce their viscosities so that they can be readily pumped. Line Type Heaters, which can be installed in a pipeline at any point, are used either to preheat liquids to proper temperature for further processing, or to overcome temperature losses in a piping system.

GENERAL DESCRIPTION

Tank Suction Type

This heater consists of a bundle of hairpin fintubes mounted in a shell. The shell is open at one end and furnished with a mounting flange which can be bolted directly to the tank manway flange. Standard mounting flange sizes are normally one flange size larger than the shell pipe size and are drilled to match a 150 LB ASA flange of that size. Unlike the large circular heating coils sometimes placed in the bottom of storage tanks that heat all the liquid in the tank, a fintube tank suction heater heats only the liquid being pumped. Also, they are placed some distance above the bottom of the tank, and consequently do not lose efficiency by heating through a layer of sediment.

Line Type

These heaters are designed for mounting entirely outside the tank. When used to pump fuel oil from tanks, they should normally be installed as close to the tank as possible, since the liquid is not heated to proper pumping temperature until it passes through the heater. Line heaters are similar in materials of construction, overall design and method of operation to the tank suction type heaters, with the exception that the shell inlet end is flanged. High thermal efficiency is achieved with both types of heaters.

SPECIFICATIONS

Fintubes

The heat transferring surface of Fintube Fuel Oil Heaters consists of a number of patented, highly efficient, continuously welded fintubes. Alternate fintubes are banded and an outer band surrounds the ntire bundle. This type of construction permits an unobstructed flow of oil through the heater with no "dead spaces" for sludge to accumulate. Furthermore, this type of construction insures a 100% bond between the fins and the tube with no possible air gap to lower heat transfer efficiency as in a mechanically bonded fin. Integrally welded fins on fintubes cannot work loose in service from differential expansion and the fins actually reinforce the tube rather than weaken it as with mechanical bonding grooves. These fintubes extend the area of the heat transfer surface up to 800%. The use of increased surface means a more compact and economical unit, lower surface temperatures and less fouling. After several years service in heavy oils, visual inspection of fintube heaters show little, if any, fouling deposit.

Tubesheets

Full studded tubesheets are employed on tank suction and line heaters. These tubesheets have the same outside diameters as the shell girth flanges on these units. The studded design permits removal of the
channel for tube inspection without the necessity of draining the tank or disconnecting the shell piping. The tube to tubesheet joint is a rolled joint with the tube holes double grooved - a tried and proven type of joint which has been the accepted standard in the petroleum industry for many years.

Materials and Code

Fuel Oil Heaters are constructed in accordance with the ASME Unfired Pressure Vessel Code and all materials used in their construction are code approved. The Code Stamp is applied to all heaters.


(1) FINTUBE TANK SUCTION OR LINE TYPE FUEL OIL HEATERS AS MANUFACTURED BY BROWN FINTUBE COMPANY

Standard pressure-temperature ratings of Fintube Tank Suction and Line Heaters are as follows:


Rating Tubeside Shellside Over
24" & Under 24" Diameter
Design Pressure (PSIG) 150 150 75
Test Pressure (PSIG) 225 225* 113*
Design Temperature (°F) 500 500 500


* These ratings apply only to Heaters having Flanged inlet ends (line type heaters) due to the inability to pressure test the open-end Shell or Tank Suction Type Heater.

The following examples will illustrate the nomenclature used in designating a Fintube Fuel Oil Heater.


 


Type 2(a)



B.F.T Type Shell OD A* B* C D E F H J K M
SBEU8 8-5/8" 1'9-1/4" (4-3/4") 14" 2-1/2" 2-3/4" 8-13/16" 4" 2" 1" 10"
SBEU10 10-3/4" 2'1-3/4" (2-1/4") 16" 2-3/4" 3-1/2" 10-7/8" 6" 3" 1-1/2" 12"
SBEU12 12-3/4" 2'2-1/2" (2") 16-1/2" 3-1/2" 4" 11-1/2" 6" 3" 1-1/2" 14"
SBEU14 14" 2'6-3/4" (3/8") 19-1/8" 3-3/4" 4-1/2" 12" 6" 4" 2" 16"
SBEU16 16" 2'8-1/2" 5/8" 19-7/8" 4-1/4" 5-1/2" 14-1/2" 6" 4" 2" 18"
SBEU18 18" 2'11-1/2" 2-1/2" 21" 4-1/2" 6-1/4" 14-1/2" 8" 4" 2" 20"


Type 2(b)



B.F.T Type Shell OD A* B* C D E F H J K M
SBEU20 20" 4'2-3/4" 2-1/8" 21-3/4" 16" 16" 16" 16" 8" 6" 2-1/2"
SBEU22 22" 4'3" (5/16") 2'0-1/8" 16-1/2" 16-1/2" 17" 8" 6" 2-1/2" 24"
SBEU24 24" 4'7" 2-1/8" 2'2-1/8" 18" 18" 18-1/2" 8" 6" 2-1/2" 26"
SBEU26 26" 5'2-5/8" 2" 2'3-3/8" 19-1/2" 19-1/2" 19-1/2" 10" 8" 3" 28"†
SBEU28 28" 5'8-5/8" 4-3/4" 2'5-1/8" 20-1/2" 20-1/2" 20-1/2" 12" 8" 3" 30"†
SBEU30 30" 5'9-1/2" 4-3/4" 2'5-3/4" 21-1/2" 21-1/2" 21-1/2" 12" 8" 3" 32"†
SBEU32 32" 6'2-1/2" 6-1/2" 2'7-3/8" 22-1/2" 22-1/2" 22-1/2" 12" 10" 4" 34"†
SBEU34 34" 6'7-1/4" 8-1/4" 2'10-1/8" 2'1" 2'1" 2'1" 16" 10" 4" 36"†
SBEU36 36" 6'10" 10" 2'10-3/8" 2'2" 2'2" 2'2" 16" 10" 4" 38"†


* Add Nominal Fin Length to Length shown. (Subtract when dimension is shown in parentheses.)
125# ASA Lightweight Flange.
For Shell OD sizes up through 18" either type of Tube Bonnet is available.

For Shell OD sizes 20" and up the dished Head, Type 2(b), is used.


Type 4(a)



B.F.T Type Shell OD A* B* C D E F H J K L M
LBEU8 8-5/8" 2'2" 12" 14" 2-1/2" 2-3/4" 8-13/16" 4" 4" 2" 1" 4-13/16"
LBEU10 10-3/4" 3'0" 1'8" 16" 2-3/4" 3-1/4" 10-7/8" 6" 6" 3" 1-1/2" 6-1/8"
LBEU12 12-3/4" 2'11-1/8" 1'6-1/2" 1'6-5/8" 3-1/2" 4" 11-1/2" 6" 6" 3" 1-1/2" 7-1/8"
LBEU14 14" 3'2-5/8" 1'7-3/8" 1'9-1/4" 3-3/4" 4-1/2" 13" 6" 6" 4" 2" 7-3/4"
LBEU16 16" 3'5-3/8" 1'9-1/2" 1'9-7/8" 4-1/4" 5-1/2" 14-1/2" 6" 6" 4" 2" 8-3/4"
LBEU18 18" 3'10" 2'1" 2'1" 4-1/2" 6-1/4" 14-1/2" 8" 8" 4" 2" 9-3/4"



B.F.T Type Shell OD A* B* C D E F G H J K L
LBEU20 20" 5'4" 2'5-3/8" 21-3/4" 16" 16" 16" 8" 8" 6" 2-1/2" 11"
LBEU22 22" 5'6-1/2" 2'5-1/2" 2'0-1/8" 16-1/2" 16-1/2" 17" 8" 8" 6" 2-1/2" 12"
LBEU24 24" 6'0" 2'8-1/2" 2'2-1/8" 18" 18" 18-1/2" 8" 8" 6" 2-1/2" 13"
LBEU26 26" 6'5-5/8" 2'11" 2'3-3/8" 19-1/2" 19-1/2" 19-1/2" 10" 10" 8" 3" 14-3/8"
LBEU28 28" 7'0-1/4" 3'2-3/8" 2'5-1/8" 20-1/2" 20-1/2" 20-1/2" 12" 12" 8" 3" 15-3/8"
LBEU30 30" 7'1-1/2" 3'2-3/4" 2'5-3/4" 21-1/2" 21-1/2" 21-1/2" 12" 12" 8" 3" 16-3/8"
LBEU32 32" 7'7" 3'5" 2'7-3/8" 22-1/2" 22-1/2" 22-1/2" 12" 12" 10" 4" 17-3/8"
LBEU34 34" 8'1" 3'8" 2'10-1/8" 2'1" 2'1" 2'1" 16" 16" 10" 4" 18-3/8"
LBEU36 36" 8'4-1/2" 3'10-1/2" 2'10-3/8" 2'2" 2'2" 2'2" 16" 16" 10" 4" 19-3/8"


* Add nominal fin length to length shown.
For Shell OD sizes up through 18" either type of Tube Bonnet is available.
For Shell OD sizes 20" and up the dished Head, Type 4(b), is used.


Capacities are shown in Gallons Per Hour, maximum viscosity of 3,000 SSU @ 122°F. Maximum pressure loss, through heater, is 5 PSI. Prices are based on 150 PSIG design and TEMA "C" construction.


Type Steam Pressure - PSIG Weight (LBS) Estimating Prices 3Q 2017
5 10 25 50 100 150
HEATING RANGE 60°F TO 100°F.- CAPACITY IN GALLONS PER HOUR,
SBEU0807 1760 1970 2530 3070 3840 4500 710 $6.855,00
SBEU0811 2250 2400 - - - - 950 $7.325,00
SBEU1007 3300 3620 4480 5190 - - 1050 $9.625,00
SBEU1207 4110 4610 5720 7360 9180 10780 1400 $12.350,00
SBEU1211 5210 - - - - - 1870 $13.395,00
SBEU1607 7120 7870 10260 12420 15600 17200 2050 $17.425,00
SBEU1807 8130 9450 11550 14400 18420 20800 2380 $20.100,00
SBEU1811 11000 - - - - - 3210 $22.190,00
SBEU2007 11500 13400 16400 20400 26100 - 2930 $23.450,00
SBEU2207 13530 15730 19250 24000 - - 3290 $25.540,00
SBEU2407 17280 19580 23100 27500 - - 4000 $30.780,00
HEATING RANGE 60°F TO 120°F.- CAPACITY IN GALLONS PER HOUR,
SBEU823 865 1010 1290 1650 1990 2280 710 $7.115,00
SBEU0811 1380 1530 1950 2470 3200 3700 950 $7.535,00
SBEU0815 1940 2090 2660 3440 4530 5050 1190 $8.160,00
SBEU0820 2500 2770 - - - - 1490 $9.000,00
SBEU1007 1660 1880 2340 2960 3830 4480 1050 $9.625,00
SBEU1011 2600 2950 3660 4650 6000 6480 1410 $10.885,00
SBEU1015 3540 4010 4500 - - - 1780 $11.090,00
SBEU1207 2120 2380 3020 3860 5000 5780 1400 $12.355,00
SBEU1211 3420 3850 5300 6220 8030 9300 1870 $13.395,00
SBEU1215 4860 5150 6500 8340 10750 12000 2330 $15.285,00
SBEU1607 3720 4200 5220 6620 8560 9960 2050 $17.375,00
SBEU1611 5840 6580 8210 10400 14100 15650 2740 $20.100,00
SBEU1615 7580 8570 10680 13500 17480 18500 3420 $21.985,00
SBEU1807 4030 4590 5860 7540 9850 11700 2380 $20.100,00
SBEU1811 6310 7200 9300 11830 15470 18380 3210 $22.405,00
SBEU1815 8670 9860 12580 16180 21200 21700 4040 $25.125,00
SBEU2007 5720 6500 8320 10700 14000 16600 2930 $23.450,00
SBEU2011 8950 10200 13200 16800 21900 26000 3920 $27.010,00
SBEU2207 6710 7640 9750 12550 16400 19500 3290 $25.540,00
SBEU2211 10500 12000 15500 19200 26700 30600 4420 $28.680,00
SBEU2407 8600 10130 15320 16770 21100 24700 4000 $30.780,00
SBEU2411 13720 15900 24100 26350 33160 38700 5390 $35.175,00
SBEU2415 18420 21750 - - - - 6780 $39.985,00
HEATING RANGE 60°F TO 140°F.- CAPACITY IN GALLONS PER HOUR,
SBEU834 496 582 720 900 1170 1400 710 $6.910,00
SBEU0811 776 910 1130 1422 1900 2210 950 $7.325,00
SBEU0815 1060 1240 1540 1930 2580 2990 1190 $8.160,00
SBEU0820 1410 1660 2050 2560 3430 3970 1490 $9.000,00
SBEU1007 947 1080 1370 1730 2320 2780 1050 $9.625,00
SBEU1011 1490 1700 2160 2730 3650 4370 1410 $10.885,00
SBEU1015 2030 2320 2950 3690 4960 5930 1780 $11.090,00
SBEU1020 2700 3080 3900 4920 6620 7930 2230 $12.565,00
SBEU1207 1200 1420 1770 2260 3030 3560 1400 $12.350,00
SBEU1211 1940 2290 2840 3470 4850 5740 1870 $13.395,00
SBEU1215 2580 3060 3790 4850 6530 7670 2330 $15.280,00
SBEU1220 3470 4110 5090 6510 8750 10180 2930 $16.330,00
SBEU1607 2120 2480 3120 3950 5180 6200 2050 $17.375,00
SBEU1611 3330 3900 4880 6190 8340 9730 2740 $20.100,00
SBEU1615 4330 5070 6350 7450 10800 12700 3420 $21.985,00
SBEU1620 6080 7000 8900 11300 15180 17700 4280 $24.495,00
SBEU1807 2230 2660 3360 4340 5920 7030 2380 $20.100,00
SBEU1811 3510 4170 5280 6820 9300 10110 3210 $22.405,00
SBEU1815 4820 5710 7080 9350 12740 15480 4040 $25.125,00
SBEU1820 6410 7610 9600 12400 16980 20150 5070 $28.475,00
SBEU2007 3160 3770 4770 6160 8120 9950 2930 $22.510,00
SBEU2011 4980 5920 7490 9680 13200 14350 3930 $27.010,00
SBEU2015 6840 8100 10000 13270 18100 21950 4930 $29.520,00
SBEU2020 9100 10800 13620 17600 24100 28600 6180 $33.290,00
SBEU2207 3710 4430 5590 7220 9850 11700 3290 $25.540,00
SBEU2211 5850 6940 8790 11360 15180 16830 4420 $28.680,00
SBEU2215 8020 9510 11790 15570 21200 25750 5560 $32.245,00
SBEU2220 10680 12670 16000 20650 28250 33500 6970 $31.575,00
SBEU2407 5200 6170 7730 9870 13200 15580 4000 $30.780,00
SBEU2411 8150 9660 12150 15480 20700 24450 5390 $35.175,00
SBEU2415 11200 13250 16600 21230 28300 33450 6780 $39.985,00
SBEU2420 14900 17580 22100 28200 37700 44600 8510 $44.595,00
HEATING RANGE 80°F TO 180°F.- CAPACITY IN GALLONS PER HOUR,
LBEU867 266 317 448 610 850 1055 700 $6.910,00
LBEU0811 417 497 703 957 1345 1656 940 $7.325,00
LBEU0815 572 682 965 1310 1830 2270 1180 $8.160,00
LBEU0820 758 905 1278 1740 2420 3010 1480 $9.000,00
LBEU1007 518 617 890 1200 1690 2060 1060 $9.625,00
LBEU1011 813 970 1400 1870 2670 3230 1420 $10.885,00
LBEU1015 1115 1330 1915 2580 3640 4440 1790 $11.090,00
LBEU1020 1480 1760 2540 3420 4820 5870 2240 $12.770,00
LBEU1207 658 810 1140 1550 2175 2660 1400 $12.565,00
LBEU1211 1030 1270 1790 2430 3410 4170 1870 $13.815,00
LBEU1215 1416 1742 2450 3340 4670 5720 2340 $15.700,00
LBEU1220 1880 2310 3250 4420 6200 7580 4090 $16.750,00
LBEU1607 1135 1392 1950 2620 3710 4500 2050 $17.795,00
LBEU1611 1780 2190 3060 4120 5820 7070 2740 $20.520,00
LBEU1615 2460 3000 4200 5640 8000 9700 3430 $21.985,00
LBEU1620 3240 3970 5560 7470 10580 12830 4290 $24.915,00
LBEU1807 1250 1540 2170 2970 4110 5060 2610 $20.520,00
LBEU1811 1965 2420 3410 4670 6450 8800 3440 $22.825,00
LBEU1815 2690 3310 4670 6400 8850 10900 4270 $25.540,00
LBEU1820 3560 4390 6180 8470 11720 11420 5300 $28.890,00
LBEU2007 1770 2180 3070 4200 5820 7160 2940 $23.655,00
LBEU2011 2780 3430 4830 6620 9140 12480 3940 $27.430,00
LBEU2015 3810 4690 6620 9060 12530 15440 4940 $29.940,00
LBEU2020 5040 6220 8760 12000 16620 20450 6190 $33.915,00
LBEU2207 2080 2560 3610 4940 6840 8420 5030 $25.745,00
LBEU2211 3270 4030 5670 7770 10730 14650 4470 $29.100,00
LBEU2215 4480 5510 7760 10660 14750 18150 5600 $32.870,00
LBEU2220 5920 7300 10300 14100 19500 24000 7020 $37.685,00
LBEU2407 2800 3390 4820 6550 8300 11150 6100 $31.405,00
LBEU2411 4400 5320 7520 10300 13000 17500 5400 $35.800,00
LBEU2415 6025 7300 10400 14100 17900 24000 6790 $40.200,00
LBEU2420 7980 9660 13750 18700 24650 31800 8520 $45.015,00
HEATING RANGE 80°F TO 200°F.- CAPACITY IN GALLONS PER HOUR,
LBEU0807 141 184 277 400 586 730 700 $6.910,00
LBEU0811 221 289 435 628 920 1150 940 $7.325,00
LBEU0815 303 396 596 860 1260 1570 1180 $8.160,00
LBEU0820 403 526 792 1140 1675 2090 1480 $9.000,00
LBEU1007 283 384 433 843 1270 1566 1060 $9.625,00
LBEU1011 445 603 680 1310 1990 2450 1420 $10.885,00
LBEU1015 608 827 932 1810 2730 3370 1790 $11.090,00
LBEU1020 810 1100 1240 2410 3630 4480 2240 $12.770,00
LBEU1207 356 458 695 985 1410 1760 1400 $12.565,00
LBEU1211 519 720 1090 1550 2210 2750 1870 $13.815,00
LBEU1215 765 985 1495 2120 3030 3780 2340 $15.700,00
LBEU1220 1020 1340 1990 2820 4030 5030 4090 $16.750,00
LBEU1607 614 797 1200 1680 2455 3110 2050 $17.795,00
LBEU1611 965 1250 2040 2640 3850 4870 2740 $20.520,00
LBEU1615 1320 1713 2580 2710 5270 6680 3430 $21.985,00
LBEU1620 1756 2280 3430 4800 7020 8890 4290 $24.915,00
LBEU1807 735 943 1448 2040 2940 3610 2610 $20.520,00
LBEU1811 1155 1480 2270 3200 4610 5670 3440 $22.825,00
LBEU1815 1580 2030 3180 4380 6320 7770 4270 $25.540,00
LBEU1820 2100 2700 4140 5830 8400 10310 5300 $28.890,00
LBEU2007 1040 1340 2050 2890 4170 5120 2940 $23.655,00
LBEU2011 1640 2100 3220 4540 6540 8050 3940 $27.430,00
LBEU2015 2240 2880 4510 6220 8970 11000 4940 $29.940,00
LBEU2020 2980 3830 5870 8270 11900 14630 6190 $33.915,00
LBEU2207 1240 1570 2410 3040 4890 6010 5030 $25.745,00
LBEU2211 1920 2460 3780 5320 7670 9440 4470 $29.100,00
LBEU2215 2630 3380 5290 7280 10530 12930 5600 $32.870,00
LBEU2220 3490 4490 6880 9700 14000 17150 7020 $37.685,00
LBEU2407 1665 2120 2830 4510 6460 7980 6100 $31.405,00
LBEU2411 2610 3330 4450 7070 10150 12540 5400 $35.800,00
LBEU2415 3580 4560 6090 9700 13900 17180 6790 $40.200,00
LBEU2420 4760 6060 8100 12900 18480 22800 8520 $45.015,00
HEATING RANGE 80°F TO 220°F.- CAPACITY IN GALLONS PER HOUR,
LBEU0807 - 141 202 298 443 562 700 $6.910,00
LBEU0811 - 179 317 468 697 882 940 $7.325,00
LBEU0815 - 245 435 641 954 1210 1180 $8.160,00
LBEU0820 - 326 578 843 1268 1610 1480 $9.000,00
LBEU1007 - 208 374 571 650 1090 1060 $9.625,00
LBEU1011 - 326 587 896 1020 1710 1420 $10.885,00
LBEU1015 - 448 805 1230 1400 2340 1790 $11.090,00
LBEU1020 - 595 1070 1634 1860 3120 2240 $12.770,00
LBEU1207 - 258 462 703 1060 1350 1400 $12.565,00
LBEU1211 - 405 726 1100 1660 2120 1870 $13.815,00
LBEU1215 - 555 993 1510 2280 2910 2340 $15.700,00
LBEU1220 - 738 1320 2010 3030 3860 4090 $16.750,00
LBEU1607 - 435 777 1180 1800 2265 2050 $17.795,00
LBEU1611 - 683 1240 1850 2830 3560 2740 $20.520,00
LBEU1615 - 935 1670 2540 3870 4870 3430 $21.985,00
LBEU1620 - 1245 2220 3380 5150 6480 4290 $24.915,00
LBEU1807 - 514 968 1400 2110 2700 2610 $20.520,00
LBEU1811 - 791 1520 2200 3310 4240 3440 $22.825,00
LBEU1815 - 1100 2080 3010 4540 5800 4270 $25.540,00
LBEU1820 - 1470 2770 4000 6030 7720 5300 $28.890,00
LBEU2007 - 729 1372 1980 2990 3830 2940 $23.655,00
LBEU2011 - 1120 2150 3120 4690 6010 3940 $27.430,00
LBEU2015 - 1560 2950 4270 6430 8220 4940 $29.940,00
LBEU2020 - 2080 3920 5670 8550 10940 6190 $33.915,00
LBEU2207 - 850 1610 2330 3520 4500 5030 $25.745,00
LBEU2211 - 1320 2530 3660 5520 7060 4470 $29.100,00
LBEU2215 - 1830 3460 5020 7560 9660 5600 $32.870,00
LBEU2220 - 2450 4620 6670 10000 12870 7020 $37.685,00
LBEU2407 - 1162 2085 3100 4780 6100 6100 $31.405,00
LBEU2411 - 1830 3270 4870 7500 9570 5400 $35.800,00
LBEU2415 - 2500 4480 6670 10300 13140 6790 $40.200,00
LBEU2420 - 3330 5960 8870 13680 17450 8520 $45.015,00
HEATING RANGE 80°F TO 240°F.- CAPACITY IN GALLONS PER HOUR,
LBEU0807 - - 126 239 342 436 700 $6.910,00
LBEU0811 - - 198 376 537 685 940 $7.325,00
LBEU0815 - - 271 515 736 937 1180 $8.160,00
LBEU0820 - - 361 683 978 1248 1480 $9.000,00
LBEU1007 - - 230 388 616 830 1060 $9.625,00
LBEU1011 - - 361 610 967 1300 1420 $10.885,00
LBEU1015 - - 495 835 1325 1780 1790 $11.090,00
LBEU1020 - - 658 1110 1760 2470 2240 $12.770,00
LBEU1207 - - 286 478 762 1000 1400 $12.565,00
LBEU1211 - - 448 750 1200 1570 1870 $13.815,00
LBEU1215 - - 615 1030 1640 2150 2340 $15.700,00
LBEU1220 - - 818 1378 2180 2850 4090 $16.750,00
LBEU1607 - - 467 783 1240 1630 2050 $17.795,00
LBEU1611 - - 734 1230 1950 2560 2740 $20.520,00
LBEU1615 - - 1100 1685 2670 3610 3430 $21.985,00
LBEU1620 - - 1340 2240 3540 4670 4290 $24.915,00
LBEU1807 - - 570 955 1565 1910 2610 $20.520,00
LBEU1811 - - 895 1500 2350 3000 3440 $22.825,00
LBEU1815 - - 1230 2060 3350 4110 4270 $25.540,00
LBEU1820 - - 1630 2730 4470 5460 5300 $28.890,00
LBEU2007 - - 807 1350 2220 2710 2940 $23.655,00
LBEU2011 - - 1270 2120 3330 4250 3940 $27.430,00
LBEU2015 - - 1745 2920 4750 5820 4940 $29.940,00
LBEU2020 - - 2310 2870 6340 7740 6190 $33.915,00
LBEU2207 - - 948 1590 2610 3180 5030 $25.745,00
LBEU2211 - - 1495 2500 3910 5000 4470 $29.100,00
LBEU2215 - - 2050 3420 5570 6830 5600 $32.870,00
LBEU2220 - - 2610 4540 7430 9080 7020 $37.685,00
LBEU2407 - - 1280 2080 3440 4600 6100 $31.405,00
LBEU2411 - - 2010 3260 5400 7220 5400 $35.800,00
LBEU2415 - - 2760 4480 7400 9900 6790 $40.200,00
LBEU2420 - - 3660 5950 9840 13150 8520 $45.015,00


Notes:

The purpose of the data on the preceding pages is to present technical information and budgetary estimating prices on Tank Suction and Line Type Fuel Oil Heaters as manufactured by Brown Fintube Company. The estimating prices shown are FOB jobsite to points within the 48 contiguous United States.


When the equipment is received at the project site it will be necessary to unload, inspect, transport to point of installation, install and perform the cleanup work occasioned by the foregoing.
The Direct Labor Manhours required for the work described may be estimated as follows:


Type Manhours, Each
Tank Suction Heater or Line Type Heaters, any Model (18) Manhours Plus (1.5) Manhours Per Ton


Example: Estimate the Manhours required for installing Tank Suction Heater Model SBEU2407 ( weight = 4,000 LBS)
2 Tons = (18) Manhours + (1.5 x 2 Tons) or (18) + (3) for a total of (21) Manhours.
The Manhours above assume the transporting distance will not be in excess of 200'0" and that site or other obstructions do not exist.

MANHOURS EXTENSION TO DETERMINE DIRECT LABOR COST FOR INSTALLATION

The Manhours should be extended by a Composite Crew Rate determined from the Wage Rates in effect at the project site.


TANK SUCTION TYPE HEATERS WEIGHT & COST - 3Q 2017

 

Data Input


Tank suction type heater results


Cost (USD):

Cap (Gal/hr):

Weight (LBS):

(Mhrs):



 

LINE TYPE HEATERS WEIGHT & COST - 3Q 2017

 

Data Input


Line type heater results


Cost (USD):

Cap (Gal/hr):

Weight (LBS):


 
Copy Protected by Chetan's WP-Copyprotect.